Latest E20-375 Dumps in VCE and PDF from PassLeader: https://www.passleader.com/e20-375.html (232 Q&As), welcome to download the latest DELL&EMC E20-375 exam dumps from PassLeader.com. PassLeader.com has the most valid E20-375 exam dumps, which will help you passing E20-375 exam easily! Both E20-375 VCE and PDF dumps are available now, 100% pass ensure.
Besides, you can download the latest PassLeader E20-375 Dumps online for FREE: https://drive.google.com/open?id=1aZ2kLYcJbpe1Kr5lhudnH5FI9gwgyV7S
QUESTION 41
In a six RPA cluster, RPA 2 is hosting a Consistency Group with only a local copy. It is frequently reporting High Load Events. What would you do to troubleshoot this issue?
A. Use the Balance Load feature.
B. In Installation Manager, use Diagnostics > IP Diagnostics > Test throughput.
C. Increase the production journal size.
D. Change the RPO of the affected Consistency Group.
Answer: A
QUESTION 42
You have configured replication using a local and remote copy. After a data corruption event, you decide to restore production from a point-in-time image of the local copy. What must be considered before restoring the volume?
A. Remote replication is paused during the restore
B. Journal history at both sites will be lost
C. Consistency Group will be disabled
D. Production journal must be restored
Answer: C
QUESTION 43
If you wanted to use the Roll Image in Background option to access an image, which access mode should you select?
A. Virtual Access
B. Logged access
C. Direct Access
D. Snap Access
Answer: A
QUESTION 44
An environment consists of a two-RPA, single cluster. There are 112 Consistency Groups (CGs) configured and replicating. The administrator asks you what impact an RPA failure would have. What should you tell them?
A. All CGs will run on a single RPA.
B. The first 64 CGs will run on the single RPA, the others will be disabled.
C. The first 64 CGs will run on the single RPA, the others will be paused.
D. The 64 CGs with the highest priority will run on the single RPA.
Answer: A
QUESTION 45
Which Open Replicator mode is used by the RecoverPoint VMAX write splitter?
A. Modified Hot Push
B. Cold Push
C. Hot Pull
D. Cold Pull
Answer: A
QUESTION 46
In the Recovery tab of Unisphere for RecoverPoint, which option is used to temporarily mount an image?
A. Test a Copy
B. Enable Image Access
C. Manage Recovery
D. Enable Direct Access
Answer: A
QUESTION 47
Which EMC storage technologies are supported with EMC RecoverPoint?
A. VNX, VMAX, and VPLEX.
B. VNX, Data Domain, and Isilon.
C. VMAX, VPLEX, and Data Domain.
D. VPLEX, Isilon, and VNX.
Answer: A
QUESTION 48
An environment consists of a two-RPA, single cluster. There are 74 Consistency Groups (CGs) configured and replicating. The administrator asks you what impact an RPA failure would have. What should you tell them?
A. All CGs will run on a single RPA.
B. The first 64 CGs will run on the single RPA, the others will be disabled.
C. The first 64 CGs will run on the single RPA, the others will be paused.
D. The 64 CGs with the highest priority will run on the single RPA.
Answer: A
QUESTION 49
In Unisphere for RecoverPoint, where should a user navigate in order to collect logs for support purposes?
A. Admin Tab > System Analysis Tools > Collect System Information
B. Admin Tab > System Notifications > Configure System Reports and Alerts
C. Dashboard Tab > System Analysis Tools > Detect Bottlenecks
D. Admin Tab > RPA Clusters > Export Consolidated Statistics
Answer: A
QUESTION 50
A customer wants to implement a two-node RecoverPoint solution with local replication. How many IP addresses are required for each cluster?
A. 2
B. 3
C. 4
D. 5
Answer: D
QUESTION 51
Refer to the exhibit. In Unisphere for RecoverPoint, the status tab diagram of a particular Consistency Group shows two copies linked by a dashed green line on top of a solid green line. What type of link is this?
A. Synchronous
B. Asynchronous
C. Fibre Channel
D. iSCSI
Answer: A
QUESTION 52
What is the minimum size of the journal when using Distributed Consistency Groups?
A. 5 GB
B. 20 GB
C. 40 GB
D. 60 GB
Answer: C
QUESTION 53
Which IP diagnostic command is used to test the IP connectivity performance between RPAs when the ‘Test Throughput’ option is chosen in the RPA interface?
A. iperf
B. top
C. ethtool
D. netstat
Answer: A
QUESTION 54
What is the maximum number of copies supported using the MetroPoint topology for VPLEX continuous data replication?
A. 3
B. 4
C. 5
D. 8
Answer: C
QUESTION 55
What is the maximum supported storage capacity, per license, for an EMC RecoverPoint/EX environment?
A. 100 terabytes
B. 2 petabytes
C. 4 petabytes
D. 10 petabytes
Answer: B
QUESTION 56
You are using the Test a Copy wizard and have chosen virtual access to test your database upgrade. The image has been mounted to a test host. While testing the database upgrade, the host loses access to the image. What can you do to avoid this problem in the future?
A. Add more journal capacity.
B. Add an RPA to the local RecoverPoint cluster.
C. Re-enable image access.
D. Mount the image to another host.
Answer: A
QUESTION 57
A company has just installed a RecoverPoint solution and configured it with two clusters. Which command will monitor system performance for both sites?
A. export_statistics
B. netstat-a
C. balance_load
D. config_io_throttling
Answer: A
QUESTION 58
The Getting Started wizard that is displayed the first time a user accesses Unisphere for RecoverPoint assists with performing what action?
A. Adding licenses
B. Adding splitters
C. Configuring RPAs
D. Creating Consistency Groups
Answer: A
QUESTION 59
What is a characteristic of a volume sweep?
A. Initialization is done on specific volumes in a Consistency Group.
B. Initialization is done on all volumes in a Consistency Group.
C. A volume sweep occurs when a user enables a disabled volume.
D. A volume sweep occurs when a user enables a disabled splitter.
Answer: A
QUESTION 60
Refer to the exhibit. A customer is implementing a RecoverPoint solution with a two-node cluster. What is represented by the ‘A’ in the exhibit?
A. WAN
B. LAN
C. iSCSI
D. Floating IP
Answer: A
Welcome to try PassLeader E20-375 VCE and PDF dumps: https://www.passleader.com/e20-375.html (232 Q&As)
Or, download more PassLeader E20-375 dumps for FREE: https://drive.google.com/open?id=1aZ2kLYcJbpe1Kr5lhudnH5FI9gwgyV7S