Latest E20-598 Dumps in VCE and PDF from PassLeader: https://www.passleader.com/e20-598.html (186 Q&As), welcome to download the latest DELL&EMC E20-598 exam dumps from PassLeader.com. PassLeader.com has the most valid E20-598 exam dumps, which will help you passing E20-598 exam easily! Both E20-598 VCE and PDF dumps are available now, 100% pass ensure.
Besides, you can download the latest PassLeader E20-598 Dumps online for FREE: https://drive.google.com/open?id=1URtmrUyTbL3Zw3INiqFX9vaWh6JwDag0
QUESTION 97
Which document should be approved and available to you at the time of a node addition to a customer’s EMC Avamar server?
A. SVC Qualifier
B. Healthcheck report
C. ConnectEMC (SYR) report
D. Sales order
Answer: A
QUESTION 98
A node has failed on a multi-node EMC Avamar grid and is offline. The customer insists on running backups while the replacement is occurring. What can you tell the customer about the impact of running backups during a node replacement procedure?
A. Replacement procedure will take significantly longer with backups running.
B. Replacement procedure will be unaffected by running backups.
C. Replacement procedure cannot continue while backups are running.
D. Replacement procedure will take less time with backups running.
Answer: A
QUESTION 99
What is the minimum physical memory that needs to be allocated to an EMC Avamar Virtual Edition with 1.0 TB of licensable capacity?
A. 2048 MB
B. 3072 MB
C. 4096 MB
D. 16384 MB
Answer: C
QUESTION 100
What is the purpose of running the EMC Avamar Virtual Edition benchmark process?
A. Verify that the performance of the disk storage meets specifications
B. Verify that there is enough memory
C. Verify that there is enough storage available
D. Verify that the CPU on the system is fast enough
Answer: A
QUESTION 101
For an Avamar Gen4 single node, how many Ethernet ports are provided?
A. 2
B. 4
C. 6
D. 8
Answer: B
QUESTION 102
What is the minimum number of EMC Avamar active storage nodes required for a supported RAIN configuration?
A. 2
B. 3
C. 4
D. 5
Answer: B
QUESTION 103
What is considered a CRU (Customer Replaceable Unit) for Avamar Gen4?
A. Accelerator Node
B. ATI 9924 24-port switch
C. 1 Gb Network Interface Cards
D. RAM Memory Modules
Answer: A
QUESTION 104
Which RAID level is used in an EMC Avamar 7.8 TB single-node server?
A. 1
B. 5
C. 6
D. 10
Answer: A
QUESTION 105
When using YAST to set up networking on a Gen4 Avamar node, how do you backspace in a field?
A. Ctrl-h
B. Ctrl-b
C. Backspace
D. Ctrl-c
Answer: A
QUESTION 106
On a single-node Gen4 EMC Avamar Data Store, what is the optional use of the GB2 port?
A. Outgoing replication
B. MC and administrative traffic
C. High availability
D. Connection to the internal switch
Answer: A
QUESTION 107
You are installing a single-node Gen4 Avamar Data Store. Which label is on the port that is optionally used to connect the node to the second customer switch for high availability?
A. GB1
B. GB2
C. GB3
D. GB4
Answer: C
QUESTION 108
Which basic network settings are required when configuring an EMC Avamar node at installation?
A. IP address, DNS parameters, subnet, hostname and domain, gateway.
B. IP address, SMTP server, subnet, hostname and domain, gateway.
C. IP address, DNS parameters, duplex, hostname and domain, gateway.
D. IP address, DNS parameters, subnet, MTU size, gateway.
Answer: A
QUESTION 109
You are checking the network cabling on a multi-node EMC Avamar Gen4 Data Store. Which port should be used to connect the utility node to the first switch?
A. GB1 is connected to port 1 on the switch
B. GB1 is connected to port 5 on the switch
C. GB2 is connected to port 1 on the switch
D. GB2 is connected to port 5 on the switch
Answer: C
QUESTION 110
When configuring basic networking for the storage nodes in a multi-node EMC Gen4 Avamar, which port is used to perform this operation?
A. iDRAC
B. GB1
C. GB3
D. GB4
Answer: A
QUESTION 111
Starting at the bottom, what is the recommended order for racking components in a Gen4 EMC Avamar Data Store rack without premium support?
A. Utility, spare, storage, switches.
B. Switches, utility, storage, spare.
C. Switch A, utility, spare, storage, Switch B.
D. Switch A, spare, storage, utility, Switch B.
Answer: A
QUESTION 112
What is used to transfer configuration files to the EMC Avamar switch?
A. TFTP
B. SFTP
C. FTP
D. SCP
Answer: A
Welcome to try PassLeader E20-598 VCE and PDF dumps: https://www.passleader.com/e20-598.html (186 Q&As)
Or, download more PassLeader E20-598 dumps for FREE: https://drive.google.com/open?id=1URtmrUyTbL3Zw3INiqFX9vaWh6JwDag0