Latest E20-375 Dumps in VCE and PDF from PassLeader: https://www.passleader.com/e20-375.html (232 Q&As), welcome to download the latest DELL&EMC E20-375 exam dumps from PassLeader.com. PassLeader.com has the most valid E20-375 exam dumps, which will help you passing E20-375 exam easily! Both E20-375 VCE and PDF dumps are available now, 100% pass ensure.
Besides, you can download the latest PassLeader E20-375 Dumps online for FREE: https://drive.google.com/open?id=1aZ2kLYcJbpe1Kr5lhudnH5FI9gwgyV7S
QUESTION 1
During Consistency Group initialization, the host application experiences a performance impact. What can be used to reduce the negative impact on performance?
A. I/O throttling
B. Detect bottlenecks
C. FC diagnostics
D. IP diagnostics
Answer: A
QUESTION 2
You are working on a RecoverPoint CDP solution in a mainframe environment. The environment includes VNX and VMAX storage arrays. You want to create a consistency group (CG) for the company’s database. However, some of the database volumes are located in the VNX and some others are located in the VMAX. What is a recommended cost-effective solution requiring minimal effort to manage?
A. Create one CG using VNX and VMAX volumes in the same copy.
B. Create one CG using a host-based splitter.
C. Create one CG using a fabric-based splitter.
D. Create two CGs; one for VNX volumes and another for VMAX volumes.
Answer: A
QUESTION 3
A customer is planning to use RecoverPoint as a replication solution between two locations. They want to synchronously replicate the data. Which two elements affect this type of replication?
A. Volume size and link speed.
B. Distance and latency.
C. Link speed and RPA generation.
D. Distance and volume size.
Answer: B
QUESTION 4
A customer is interested in implementing a RecoverPoint solution with a four-node cluster. How
many IP addresses are required at each site?
A. 2
B. 4
C. 5
D. 9
Answer: D
QUESTION 5
What is the reason for using IP connectivity in a RecoverPoint CRR deployment with replication over Fibre Channel?
A. Inter-site log collection and NTP synchronization.
B. LDAP synchronization and differential replication.
C. Load balance the replication with FC connectivity.
D. Site Control connections and differential replication.
Answer: A
QUESTION 6
A two-node RecoverPoint/SE CLR cluster is being implemented for a customer. There are a total of 500 LUNs that need to be replicated. How can this be accomplished?
A. Increase the number of virtual WWNs exposed by the RPAs.
B. Increase the number of RPAs to a four-node cluster.
C. Attach the RPAs to multiple storage groups.
D. Implement RecoverPoint/CL.
Answer: A
QUESTION 7
A customer is planning to use RecoverPoint as a replication solution between two locations. They want to synchronously replicate the data. Which two elements affect this type of replication?
A. Distance and latency.
B. Volume size and link speed.
C. Application consistency and connection type.
D. Protocol and volume size.
Answer: A
QUESTION 8
You are onsite investigating some performance issues in a RecoverPoint environment. EMC Support requests that you execute a detect_bottlenecks command. How should this command be executed?
A. Connect to the floating IP and log in as ‘admin’.
B. Connect to the floating IP and log in as ‘security-admin’.
C. Connect to the SiteControl RPA and log in as ‘boxmgmt’.
D. Connect to the SiteControl RPA and log in as ‘security-admin’.
Answer: A
QUESTION 9
You have installed and configured the IBM AIX kdriver on a host. When validating the installation, you find that the splitter is not seen by the RecoverPoint Management Application. Other splitters appear correctly in the GUI. Which step should you take on the host to discover the splitter by the GUI?
A. Run the rc.kdrv start command and reboot the host.
B. Run the rc.kdrv configure command and restart the kdriver.
C. Remove and reinstall the kdriver on the host.
D. Run the pkgadd -d command and restart the kdriver.
Answer: A
QUESTION 10
Which RecoverPoint CLI command would you run to get the errors and warnings for one cluster or for the entire environment?
A. get_system_status
B. get_rpa_states
C. get_groups
D. get_clusters_topology
Answer: A
QUESTION 11
Which Ethernet interface on an RPA is used for management?
A. eth0
B. eth1
C. eth2
D. eth3
Answer: B
QUESTION 12
Which virtualization solution components are supported by RecoverPoint?
A. Hyper-V, VMware vCenter monitoring, VMware SRM.
B. Hyper-V only.
C. VMware vCenter monitoring only.
D. VMware SRM only.
Answer: A
QUESTION 13
For optimal performance when presenting gatekeepers for a VMAX splitter, how many FA ports should be used in each port group?
A. 4
B. 8
C. 12
D. 16
Answer: B
QUESTION 14
A customer has a four-node RecoverPoint cluster using a VNX array. All LUNs are replicating and failover has been tested. The customer would like to integrate RecoverPoint and Unisphere. However, they are unable to manage the cluster through Unisphere. What should the customer do to correct the issue?
A. Convert to RecoverPoint/SE using Deployment Manager.
B. Reinstall the RecoverPoint splitter enabler on the VNX.
C. Rescan the VNX splitters in the management application.
D. Reinstall the RecoverPoint/SE license file.
Answer: A
QUESTION 15
Which RecoverPoint tool is used for system conversions?
A. Deployment Manager
B. Unisphere for RecoverPoint
C. SolVe Desktop
D. BCSD Sizing
Answer: A
QUESTION 16
Through what does RecoverPoint support heterogeneous storage environments?
A. VPLEX
B. Any array-based splitter
C. APIs
D. VMAX splitter only
Answer: A
QUESTION 17
You are a storage administrator tasked with creating a Consistency Group in a RecoverPoint/EX system. You launch the Protect Volumes wizard in Unisphere and notice that the desired production volume is not available. What would be a possible cause?
A. The volumes are not masked to the RPAs.
B. The volumes are masked to a host.
C. The journal volumes are on a non-licensed array.
D. Consistency Groups can only be created by boxmgmt.
Answer: A
QUESTION 18
Refer to the exhibit. A storage administrator wants to protect their distributed VPLEX volumes using RecoverPoint and the VPLEX splitter. The admin asks if there are special considerations they must be aware of. What should you tell the admin?
A. The VPLEX Consistency Group that is protected by RecoverPoint must have its site preference set to Site.
B. RecoverPoint does not support replication of distributed VPLEX devices.
C. Only VPLEX devices at Site B can be replicated using RecoverPoint.
D. All VPLEX devices at both sites can be protected using RecoverPoint, regardless of whether they are local or distributed.
Answer: A
QUESTION 19
The VSI RecoverPoint Management plug-in can protect datastores accessed by the ESXi host using which protocols?
A. Fibre Channel, FCoE, and iSCSI.
B. Fibre Channel, FCoE, and NFS.
C. FCoE, iSCSI, and CIFS.
D. FCoE, iSCSI, and NFS.
Answer: A
QUESTION 20
During a failover event, you have determined that the last bookmark had corrupted data. What is the fastest way to find the last good replica?
A. Fail back to the primary and create a new replica.
B. Complete the failover and restore the data from the local backup.
C. Create a new bookmark and use the Test a Copy wizard.
D. Move to the previous point in time.
Answer: A
Welcome to try PassLeader E20-375 VCE and PDF dumps: https://www.passleader.com/e20-375.html (232 Q&As)
Or, download more PassLeader E20-375 dumps for FREE: https://drive.google.com/open?id=1aZ2kLYcJbpe1Kr5lhudnH5FI9gwgyV7S