Latest E20-597 Dumps in VCE and PDF from PassLeader: https://www.passleader.com/e20-597.html (290 Q&As), welcome to download the latest DELL&EMC E20-597 exam dumps from PassLeader.com. PassLeader.com has the most valid E20-597 exam dumps, which will help you passing E20-597 exam easily! Both E20-597 VCE and PDF dumps are available now, 100% pass ensure.
Besides, you can download the latest PassLeader E20-597 Dumps online for FREE: https://drive.google.com/open?id=1GwsHdzuE08LQdZ5G-dMAk_mWb1hpLl7d
QUESTION 101
For which Microsoft operating system can you use the EMC NetWorker option to turn off VSS snapshots?
A. Microsoft Windows 2003
B. Microsoft Windows 7
C. Microsoft Windows 2008
D. Microsoft Windows Vista
Answer: A
QUESTION 102
Which Microsoft VSS component is responsible for creation and maintenance of a shadow copy?
A. Provider
B. Requestor
C. Writer
D. Interceptor
Answer: A
QUESTION 103
An administrator is backing up a Windows 2008 R2 system using save set ALL with EMC NetWorker version 7.6.2. The administrator notices that no VSS save sets are backed up. What can be done to back up the VSS save sets?
A. Specify VSS:DISASTER_RECOVERY=off
B. Reinstall the client software
C. Check the VSS service on the client
D. Recreate the client resource
Answer: A
QUESTION 104
In an EMC NetWorker environment, which access option is required for directed recoveries?
A. Source client must allow destination client access to its backup data.
B. Destination client must allow a remote execution request from the source client.
C. Source client must allow a remote execution request from the destination client.
D. Administering client must permit the destination client to access the source backup.
Answer: A
QUESTION 105
An administrator wants to perform a directed recovery using EMC NetWorker. What is a requirement?
A. Destination client must be in the source client’s Remote Access list.
B. Destination client must be in the source client’s servers file.
C. Administering client must be in the destination client’s Remote Access list.
D. Source client must be in the destination client’s Remote Access list.
Answer: A
QUESTION 106
An Administrator found a corruption on Resource Files on an EMC NetWorker Server. Which type of recovery should the administrator use?
A. Disaster
B. Save Set
C. Browsable
D. Direct
Answer: A
QUESTION 107
An EMC NetWorker Administrator needs to restore a client file. However, the save set for that backup is in a recoverable state. What must be done before performing a browsable recovery?
A. Rebuild CFI
B. Change Volume to appendable
C. Rebuild the Media database
D. Change retention time
Answer: A
QUESTION 108
Which policy in EMC NetWorker determines the length of time that records are retained within the Client File Index (CFI)?
A. Browse
B. Retention
C. Snapshot
D. Staging
Answer: A
QUESTION 109
In an EMC NetWorker environment, what is the default retention period for information about completed backups that is contained in the Management Console Database?
A. 1 month
B. 3 months
C. 6 months
D. 12 months
Answer: A
QUESTION 110
You want to recover a single file from an EMC NetWorker NDMP backup of a Celerra NAS device. You are performing this restore from a Windows 2003 NetWorker server. Which recovery must be performed?
A. Directed
B. recover
C. nsrsnaprecover
D. nsrndmp_recover
Answer: A
QUESTION 111
An EMC NetWorker administrator must perform a recovery of data from a failed client to a new client. Which type of recovery should the administrator use?
A. Directed
B. Browsable
C. Saveset
D. Server Recovery
Answer: A
QUESTION 112
Which command is used to recover the EMC NetWorker Management Console database?
A. recoverpsm
B. mmrecov
C. recover
D. nwrecover
Answer: A
QUESTION 113
What is the purpose of the Change Browse Time window when performing a file or directory recovery in EMC NetWorker User?
A. View the clients directory structure as it was at a specific point in time.
B. Display all recoveries of all directories from that client.
C. Determine the time and date for the volume used for the backup.
D. Show the date and time of the last recovery for that client.
Answer: A
QUESTION 114
In an EMC NetWorker environment, what is the sequence of events when automatic cloning is enabled for a backup group?
A. 1. All save sets are backed up.
2. All save sets are cloned.
3. Bootstrap save set is backed up.
4. Bootstrap save set is cloned.
B. 1. All save sets are cloned.
2. All save sets are backed up.
3. Bootstrap save set is backed up.
4. Bootstrap save set is cloned.
C. 1. All save sets are backed up.
2. All save sets are cloned.
3. Bootstrap save set is cloned.
4. Bootstrap save set is backed up.
D. 1. All save sets are backed up.
2. Bootstrap save set is backed up.
3. All save sets are cloned.
4. Bootstrap save set is cloned.
Answer: A
QUESTION 115
A customer wants to back up two EMC NetWorker clients at the same time every day. Which NetWorker resource is configured to include both clients?
A. Group
B. Policy
C. Pool
D. Schedule
Answer: B
QUESTION 116
To be able to use the EMC NetWorker Management Console remotely, which network ports need to be open?
A. 10001 through 30000
B. 111 and 514
C. 7937 and 7938
D. 9000 and 9001
Answer: B
QUESTION 117
A backup administrator wants to exclude all user temp directories during backups. How can this be implemented using EMC NetWorker?
A. Create a backup_exclusion file.
B. Exclude the files using a NetWorker directive.
C. Specify each file to exclude in the client resource.
D. Specify only the files to back up in the client save set attribute.
Answer: A
QUESTION 118
What does an EMC NetWorker directive do?
A. Directs the save set to a specific pool.
B. Omits specified files from a file system backup.
C. Specifies a file system to back up.
D. Specifies the storage node to use for the backup.
Answer: D
QUESTION 119
Which process needs to be running on each NetWorker client?
A. nsrd
B. nsrexecd
C. nsrjobd
D. nsrmmd
Answer: A
QUESTION 120
An EMC NetWorker backup job has failed 95% of the way through its operation. Which functionality is provided by the checkpoint restart feature?
A. The backup can continue from the last known good point.
B. The backup can always continue exactly where it left off.
C. The backup can be merged with data from the last server checkpoint.
D. The backup must be restarted from the beginning.
Answer: A
QUESTION 121
Which three components comprise EMC NetWorker’s three tier architecture?
A. Server, Storage Node and Client.
B. Master Server, Media Server and Client.
C. Server, Storage Agent and Client.
D. Cell Manager, Devices and Client.
Answer: A
QUESTION 122
The three primary types of EMC NetWorker hosts form an architecture/topology. What is this called?
A. EMC NetWorker Data Zone.
B. EMC NetWorker Storage Domain.
C. EMC NetWorker Storage Zone.
D. EMC NetWorker Cell.
Answer: A
QUESTION 123
Which feature of EMC NetWorker allows multiplexed, heterogeneous data to reside on the same tape?
A. OTF
B. TAR
C. CPIO
D. ZIP
Answer: A
QUESTION 124
Which EMC NetWorker feature allows for a failed backup to restart at a known good point prior to the backup failure?
A. CheckPoint Restart.
B. Client Retries.
C. Scheduled Backup Attempts.
D. Restart Window.
Answer: A
QUESTION 125
An administrator in an EMC NetWorker environment wants to know the exact backup creation date and time along with the backup level. Which EMC NetWorker functionality should be used to find this information?
A. Tracking and reporting
B. Aging
C. NMC Monitoring
D. Daemon log
Answer: A
Welcome to try PassLeader E20-597 VCE and PDF dumps: https://www.passleader.com/e20-597.html (290 Q&As)
Or, download more PassLeader E20-597 dumps for FREE: https://drive.google.com/open?id=1GwsHdzuE08LQdZ5G-dMAk_mWb1hpLl7d