Latest E20-375 Dumps in VCE and PDF from PassLeader: https://www.passleader.com/e20-375.html (232 Q&As), welcome to download the latest DELL&EMC E20-375 exam dumps from PassLeader.com. PassLeader.com has the most valid E20-375 exam dumps, which will help you passing E20-375 exam easily! Both E20-375 VCE and PDF dumps are available now, 100% pass ensure.
Besides, you can download the latest PassLeader E20-375 Dumps online for FREE: https://drive.google.com/open?id=1aZ2kLYcJbpe1Kr5lhudnH5FI9gwgyV7S
QUESTION 181
When creating a Consistency Group (CG), what is true of RecoverPoint/SE only?
A. All volumes of the array are displayed in the available volumes list.
B. Journal Compression may be used.
C. The CG must be created from Unisphere for RecoverPoint.
D. Journal volumes may be automatically provisioned.
Answer: A
QUESTION 182
Your business is planning to deploy RecoverPoint for your DR solution. What is an important consideration when using Consistency Groups in RecoverPoint 4.1?
A. Supports up to two synchronous copies per Consistency Group
B. Supports up to three remote copies in a same remote cluster
C. Fibre connectivity is required for synchronous replication
D. Supports host-based and array-based write splitters
Answer: A
QUESTION 183
There is one instance of RecoverPoint/CL installed that is protecting data within a data center. What is the maximum number of additional clusters that can be added to this configuration?
A. 1
B. 2
C. 4
D. 5
Answer: C
QUESTION 184
A customer has a four-node RecoverPoint cluster replicating over a 10 Mbps WAN link. They have a requirement to upgrade the WAN link to 1 Gbps. This will require a change of the default gateway on the RPAs. They need to accomplish this with as little impact as possible. What can be done?
A. Use Deployment Manager to edit the cluster settings.
B. Pause replication and update one RPA at a time.
C. Pause replication and update all RPAs simultaneously.
D. Leave the Consistency Groups alone and update one RPA at a time.
Answer: A
QUESTION 185
What Installation Manager menu selections would you make to view the VNX iSCSI ports?
A. 3-Diagnostics > 2-SAN diagnostics > 2-View RPA ports
B. 3-Diagnostics > 1-IP diagnostics > 2-View IP details
C. 3-Diagnostics > 2-SAN diagnostics > 3-View target LUNs
D. 3-Diagnostics > 1-IP diagnostics > 6-System connectivity
Answer: A
QUESTION 186
What is a benefit of integrating RecoverPoint with VMware Site Recovery Manager (SRM)?
A. Enables coordinated failover of virtual machines and their storage.
B. Eliminates hardware dependencies when using heterogeneous storage with VMware.
C. Enables replication of individual virtual machines without the need to replicate an entire VMFS volume.
D. Enables full protection of VMware ESXi servers.
Answer: A
QUESTION 187
Which RecoverPoint family is licensed per array and array capacity?
A. RecoverPoint/EX only
B. RecoverPoint/SE
C. RecoverPoint/CL only
D. RecoverPoint/EX and RecoverPoint/CL
Answer: A
QUESTION 188
You are protecting a volume using the wizard in Unisphere for RecoverPoint. Which state will the new Consistency Group be in immediately after completing the wizard?
A. Initializing
B. Active
C. Paused
D. Disabled
Answer: A
QUESTION 189
An existing RecoverPoint cluster has four physical RPAs deployed with VMAX arrays. Which RPAs need to be masked to the VMAX gatekeepers in order to deploy the VMAX splitter?
A. RPA 1 and RPA 2.
B. RPA 1 only.
C. All RPAs in the cluster.
D. RPA 2 only.
Answer: A
QUESTION 190
What must be installed on the VNX prior to deploying the RecoverPoint Write splitter?
A. RecoverPoint Splitter Enabler only.
B. RecoverPoint Driver and RecoverPoint Splitter Enabler.
C. RecoverPoint License.
D. Unisphere Service Manager.
Answer: A
QUESTION 191
Refer to the exhibit. A RecoverPoint cluster with two RPAs and VPLEX splitter has been deployed. When you run the rp validate-configuration VPLEX CLI command, the error shown in the exhibit is displayed. What is the most likely cause of this error?
A. Only two initiators per RPA have been used.
B. The RPAs are not zoned to the VPLEX BE ports.
C. One of the two RPAs is missing.
D. The RPAs are not zoned to the VPLEX FE ports.
Answer: A
QUESTION 192
A company has a RecoverPoint environment with 20 Consistency Groups doing remote replication. A new building was just acquired for disaster recovery and they want to move to this new location. The IP addresses and cluster name are going to be changed. What should the company consider before making the proposed change?
A. The Cluster Modification wizard should be used.
B. Changes cannot be made without a full sweep of the production and replica copies.
C. Additional journal space will be required at the production site.
D. Changes cannot be made without a full sweep of the replica copies only.
Answer: A
QUESTION 193
A company has a database protected by RecoverPoint that has become corrupted. They want to use the Recover Production wizard to repair the corruption. What action should be taken at the production host prior to starting the recovery?
A. Unmount the production volume(s).
B. Pause replication.
C. Disable the Consistency Group.
D. Create a bookmark.
Answer: A
QUESTION 194
A customer has added VPLEX to an existing RecoverPoint system. When configuring journals for a new Consistency Group they note that VPLEX Distributed Volumes are available. Why are Distributed Volumes available?
A. Certificates were not created when installing the VPLEX splitter.
B. This is not a problem; you can tell the customer to use them.
C. The VPLEX is not running GeoSynchrony code 5.1.
D. The VPLEX Distributed Volume should not be in the RPA Storage View.
Answer: A
QUESTION 195
A customer environment includes a two-cluster RecoverPoint/SE instance. They have a new data center 100 km away that they wish to protect with RecoverPoint. What steps are required to connect a new cluster to their existing RecoverPoint instance?
A. Use Deployment Manager to convert the existing instance to RP/EX.
Use Deployment Manager to connect the new cluster to the existing instance.
Install RP/EX licenses for their existing arrays.
B. Use Deployment Manager to connect the new cluster to the existing instance.
C. Install RP/SE licenses for their existing arrays.
Install RP/SE licenses for the new cluster.
Use Deployment Manager to connect the new cluster to the existing instance.
D. Install RP/CL licenses for their existing cluster.
Use Deployment Manager to connect the new cluster to the existing instance.
Answer: A
QUESTION 196
You are protecting a volume using the wizard in Unisphere for RecoverPoint. Which state will the new Consistency Group be in immediately after completing the wizard?
A. Initializing
B. Active
C. Paused
D. Disabled
Answer: A
QUESTION 197
A company recently acquired a new DR site and requires their production data to be replicated to this DR site. What is an important consideration about the RecoverPoint out-of-band architecture?
A. Performance on the production site is not impacted.
B. Site-to-site connectivity needs to be based on Fibre Channel.
C. Maximum asynchronous replication speed is 400 MBps.
D. Maximum synchronous replication speed is 400 Mbps.
Answer: A
QUESTION 198
After installing two RecoverPoint clusters you find that a Consistency Group cannot be configured with a remote copy. Why?
A. Deployment Manager was not used to connect the clusters.
B. The RPAs at the second cluster are not the same type (virtual vs physical).
C. The second cluster has not yet been added to the Repository.
D. There is no splitter added to the second cluster.
Answer: A
QUESTION 199
When designing an EMC RecoverPoint environment, what must be taken into account when a site consists of multiple VMAX splitters or multiple RecoverPoint clusters?
A. A total of 16 gatekeepers are required for each VMAX splitter/RecoverPoint cluster combination.
B. All gatekeepers must be connected to each VMAX splitter/RecoverPoint cluster combination with fixed paths.
C. A total of eight gatekeepers are required for each VMAX splitter/RecoverPoint cluster combination.
D. When the VMAX splitter/RecoverPoint cluster is connected through Fibre Channel only two gatekeepers must be used.
Answer: A
QUESTION 200
When choosing a journal for a CG what would be a factor in selecting which LUNs to use?
A. Volumes that are all close to the same size.
B. Volumes masked to the production host.
C. Any volume less than 10 GB.
D. Only thin LUNs.
Answer: A
Welcome to try PassLeader E20-375 VCE and PDF dumps: https://www.passleader.com/e20-375.html (232 Q&As)
Or, download more PassLeader E20-375 dumps for FREE: https://drive.google.com/open?id=1aZ2kLYcJbpe1Kr5lhudnH5FI9gwgyV7S