Latest E20-597 Dumps in VCE and PDF from PassLeader: https://www.passleader.com/e20-597.html (290 Q&As), welcome to download the latest DELL&EMC E20-597 exam dumps from PassLeader.com. PassLeader.com has the most valid E20-597 exam dumps, which will help you passing E20-597 exam easily! Both E20-597 VCE and PDF dumps are available now, 100% pass ensure.
Besides, you can download the latest PassLeader E20-597 Dumps online for FREE: https://drive.google.com/open?id=1GwsHdzuE08LQdZ5G-dMAk_mWb1hpLl7d
QUESTION 176
An EMC NetWorker storage node is connected to a Data Domain system with virtual tape library configured. Which device type should be configured on NetWorker?
A. Tape
B. AFTD
C. Cloud
D. Data Domain
Answer: A
QUESTION 177
An EMC NetWorker client has a network connection with direct access to a Data Domain Boost (DD Boost) storage device. The client’s 3 TB data disk is 98% full with 0.05% daily change rate. During the backup window the client’s CPU is 80% busy and the client’s network interface is 7% busy. Should Client Direct be recommended for this client?
A. No; the CPU is heavily utilized.
B. No; the data disk is too full.
C. Yes; the data change rate is low.
D. Yes; direct network access to the DD Boost device exists.
Answer: A
QUESTION 178
Which type of node resource is configured in EMC NetWorker to support backups to EMC Avamar?
A. Deduplication
B. Replication
C. Active
D. Storage
Answer: A
QUESTION 179
Which role is performed by an EMC NetWorker storage node?
A. Reads the data device during recovery.
B. Generates backups.
C. Executes the save command.
D. Performs recoveries.
Answer: A
QUESTION 180
A company wants to implement EMC NetWorker Network edition. How many client connections and physical devices are included?
A. Client connections = 10
Physical devices = 16
B. Client connections = 10
Physical devices = 32
C. Client connections = 12
Physical devices = 16
D. Client connections = 12
Physical devices = 32
Answer: A
QUESTION 181
An EMC NetWorker server is connected to a Data Domain system with a CIFS share configured. Which device type should be configured on NetWorker?
A. AFTD
B. Cloud
C. Data Domain
D. Remote
Answer: A
QUESTION 182
What is a benefit of using multiplexing with EMC NetWorker backups?
A. Improved backup device throughput
B. Improved restore times
C. Reduced network traffic
D. Reduced CPU utilization on the backup client
Answer: A
QUESTION 183
The CFI for an EMC NetWorker client was accidentally removed. What happens when trying to perform restores for that client?
A. Files cannot be browsed
B. Individual files cannot be recovered
C. Savesets cannot be recovered
D. Client-initiated restores cannot be performed
Answer: A
QUESTION 184
An EMC NetWorker client has a file system with two files; A and B. As the NetWorker administrator, you have created a backup schedule for this client consisting of the following:
– Full back up every Sunday
– Level 2 on Monday
– Level 3 on Wednesday
– Incremental on Thursday
– Level 2 on Friday
File B is changed on Monday, file C is created on Tuesday, file A is changed on Wednesday, and file D is created on Thursday. Which files will be backed up on Friday?
A. A, B, C, and D.
B. D only.
C. A and D only.
D. A, C, and D only.
Answer: A
QUESTION 185
What is a benefit of the EMC NetWorker remote device support feature?
A. Distributes the backup workload throughout a data zone.
B. Sends backup data directly to the backup device, bypassing the storage node.
C. Isolates groups of clients from other clients in the data zone.
D. Reduces the capacity requirements for backup storage.
Answer: A
QUESTION 186
Which EMC NetWorker resource represents a collection of NetWorker-labeled volumes?
A. Pool
B. Volume
C. Saveset
D. Media database
Answer: A
QUESTION 187
During a backup, which EMC NetWorker host is responsible for tracking the number of clone copies?
A. Storage Node
B. Server
C. Client
D. Console
Answer: A
QUESTION 188
Which EMC NetWorker database tracks each file in a backup?
A. CFI
B. Media database
C. Bootstrap
D. Resource directory
Answer: A
QUESTION 189
How is the EMC NetWorker Source Capacity Licensing Model measured?
A. Aggregate of full backups from all data sources.
B. Aggregate of all data stored on backup devices.
C. Aggregate of any backups from all data sources.
D. Aggregate of full backups including post deduplication storage.
Answer: A
QUESTION 190
An EMC NetWorker media database has become corrupted. Which information is unavailable?
A. Savesets
B. Devices
C. Backed up files
D. Tape libraries
Answer: A
QUESTION 191
An EMC NetWorker backup administrator wants to monitor a data protection environment consisting of Avamar, Data Domain, and NetWorker through a single interface. In addition, the administrator wants the ability to configure Avamar replication through the same interface. Which EMC tool is recommended?
A. Backup and Recovery Manager
B. Data Protection Advisor
C. NetWorker Management Console
D. Avamar Administrator Console
Answer: A
QUESTION 192
What is a characteristic of EMC NetWorker Snapshot Management?
A. Leverages proxy server to support impact-free backup.
B. Leverages proxy server to support block based backup.
C. Leverages Microsoft VSS snapshot capability.
D. Leverages volume manager snapshot capability.
Answer: A
QUESTION 193
What is a characteristic of an EMC NetWorker module backup?
A. Application being supported determines what is included in the backup save streams.
B. Module-specific NetWorker backup command runs on the NetWorker server.
C. Module-specific options are added to the NetWorker save command.
D. Backup data always goes through the storage node to the storage device.
Answer: A
QUESTION 194
While performing a backup of a database using EMC NetWorker modules, how are consistent backups of a database achieved?
A. All files are backed up at the same point or state.
B. All files are backed up at the same time.
C. Changes are applied to production data in hot backup mode.
D. Host buffers are flushed to retain the file system online.
Answer: A
QUESTION 195
How does the EMC NetWorker online backup feature work?
A. Uses a vendor specific API to extract data.
B. Copies the data to a temporary location before back up.
C. Shuts down the database before backing up the data.
D. Used only in an active/passive environment.
Answer: A
QUESTION 196
When the EMC NetWorker Module for SAP on Oracle is used, which interface can be used to perform recoveries?
A. SAP BR*Tools
B. backint only
C. RMAN only
D. Both backint and RMAN
Answer: A
QUESTION 197
What is recommended when configuring EMC NetWorker module clients?
A. Assign all module clients to the same group and pool.
B. Assign all module clients to the same group and schedule.
C. Use the same group for application and file system backups of module clients.
D. Use the same pool for application and file system backups of module clients.
Answer: A
QUESTION 198
When configuring a client resource for an EMC NetWorker module client, which are the most important attributes?
A. Save set, Backup command, and Application information.
B. Save set, Backup command, and Schedule.
C. Backup command, Group, and Schedule.
D. Application information, Group, and Policy.
Answer: A
QUESTION 199
An EMC NetWorker administrator configured a Microsoft Exchange client with the NetWorker Module for Microsoft (NMM). In which attribute did the administrator specify the backup options?
A. Application information
B. Backup command
C. Schedule
D. Save set
Answer: A
QUESTION 200
A backup administrator is implementing an EMC NetWorker backup solution for an Oracle database running on Microsoft Windows server 2008 R2. What runs on the client to perform the backup?
A. nsrdasv
B. nsrsnap_vss_save
C. save
D. savegrp
Answer: A
Welcome to try PassLeader E20-597 VCE and PDF dumps: https://www.passleader.com/e20-597.html (290 Q&As)
Or, download more PassLeader E20-597 dumps for FREE: https://drive.google.com/open?id=1GwsHdzuE08LQdZ5G-dMAk_mWb1hpLl7d