Latest E20-597 Dumps in VCE and PDF from PassLeader: https://www.passleader.com/e20-597.html (290 Q&As), welcome to download the latest DELL&EMC E20-597 exam dumps from PassLeader.com. PassLeader.com has the most valid E20-597 exam dumps, which will help you passing E20-597 exam easily! Both E20-597 VCE and PDF dumps are available now, 100% pass ensure.
Besides, you can download the latest PassLeader E20-597 Dumps online for FREE: https://drive.google.com/open?id=1GwsHdzuE08LQdZ5G-dMAk_mWb1hpLl7d
QUESTION 26
A company is running an EMC NetWorker server on a UNIX platform and wants to monitor backup operations from the UNIX command line. Which utility can be used?
A. nsrwatch
B. nsradmin
C. nsrinfo
D. nsralist
Answer: A
QUESTION 27
On an EMC NetWorker Client, which command can be used to backup local data?
A. save
B. savepsm
C. nsrsnap_vss_save
D. nsrndmp_save
Answer: A
QUESTION 28
What is the first step that occurs during a client initiated backup?
A. Save program generates one save stream of data
B. Save program connects to nsrmmd
C. Save program initiates a connection to nsrindexd
D. nsr daemon sends information to EMC NetWorker server
Answer: A
QUESTION 29
An Administrator has deployed the EMC NetWorker server software with clustering. There are 50 clients and an autochanger with 4 drives controlled by a remote storage node. What is the path of the backup data from the client to the media?
A. Client -> Storage Node -> Media
B. Client -> Media
C. Client -> Cluster Server -> Media
D. Client -> Cluster Server -> Storage Node -> Media
Answer: A
QUESTION 30
By default, the EMC NetWorker bootstrap reports are generated and sent automatically to the backup administrator. Which configuration change is required to redirect the reports to the printer?
A. Modify the action attribute of the bootstrap notification.
B. Append all bootstrap information to savegroup completion report.
C. Configure a local standalone device resource.
D. Remote administration permission needs to be configured.
Answer: A
QUESTION 31
You are logged in to your Windows-based EMC NetWorker server and are attempting to manually run a backup group on the EMC NetWorker Management Console. You are receiving an error when attempting to manually start the group What is the most likely reason for the error?
A. Your user id does not have system administrator privileges.
B. You cannot manually start backups from the EMC NetWorker Management Console.
C. The backup group is disabled on the EMC NetWorker Server.
D. You must run the group backup from the command line.
Answer: A
QUESTION 32
You are backing up a group of clients that have varying schedules. Using the EMC NetWorker Administration interface, you need to perform a full backup of all clients in that group. How would you ensure that a full backup is performed for a client when it is backed up during the next save group execution?
A. Set an override level in the backup schedules to Full in the next date.
B. Change the group level to Override.
C. Uncheck the Force incremental option in the group resource Advanced tab.
D. Create a staging resource called full and set the destination pool to full.
Answer: A
QUESTION 33
A user on the EMC NetWorker client wants to initiate a backup of selected files. At a minimum, which components must be configured before the backup can succeed?
A. Client resource, group resource, device resource, labeled volume for the device.
B. Save set, save group, schedule.
C. Client resource, device resource, clone resource.
D. Advanced file type device, client resource, labeled volume for the device, staging policy.
Answer: A
QUESTION 34
An EMC NetWorker administrator notices that clients are being backed up one at a time, even though they are scheduled to start simultaneously. What may be a cause of this?
A. Server parallelism is set to 1.
B. There is only one volume labeled.
C. Client parallelism is set to 1.
D. There is only one pool configured.
Answer: A
QUESTION 35
An EMC NetWorker administrator wants to perform backup of an application server only if a certain number of transaction logs have been reached. What type of backup needs to be performed?
A. Probe-based Backup
B. Scheduled Backup
C. Client initiated Backup
D. Incremental Backup
Answer: A
QUESTION 36
After installing EMC NetWorker server software, which resource needs to be created, at a minimum, before performing a backup?
A. Device
B. Schedule
C. Group
D. Policy
Answer: A
QUESTION 37
After initiating a manual save, you receive the following error message:
– 39078
– Save
– SYSTEM error: manual saves are not enabled
What must you check to do a manual save?
A. EMC NetWorker Server properties
B. save syntax
C. Run savegrp before run save
D. Modify client access list and grant access for all clients
Answer: A
QUESTION 38
An EMC NetWorker server has two user defined pools, Pool A and Pool B. Pool A has its “Clients” attribute set to “Client A” while the other attributes are unset. Pool B has its “Groups” attribute set to “sales” and “Levels” attribute set to “full” and other attributes unset. If a save set is generated from Client A from the “sales” group using a full level backup, which pool will the data be sent to?
A. Pool B
B. Pool A
C. Bootstrap pool
D. Default Pool
Answer: A
QUESTION 39
An EMC NetWorker server has been configured to stage an adv_file type device upon reaching an high water mark of 80%. After the staging begins, what rule determines when the staging process ends?
A. The capacity must fall below the low water mark.
B. The capacity must fall below the high water mark.
C. The adv_file type device must be empty.
D. The predefined amount of data is moved.
Answer: A
QUESTION 40
Which option for cloud backup devices allows limiting the bandwidth that EMC NetWorker consumes for cloud operations during specified periods of time?
A. Throttling
B. Quality of Service
C. Virtual Provisioning
D. Compression
Answer: A
QUESTION 41
In an EMC NetWorker environment, which two ports will nsrexecd always try to listen on?
A. 7937, 7938.
B. 9301, 9302.
C. 9000, 9001.
D. 8080, 8081.
Answer: A
QUESTION 42
Consider the EMC NetWorker directive:
<< / >>
+compressasm: .
<< /export/home >>
forget
ignore
What is the result of this directive?
A. Nothing under /export/home is compressed.
B. Only files under /export/home are compressed.
C. All .nsr files under /export/home are obeyed.
D. Nothing under /export/home is backed up.
Answer: A
QUESTION 43
An EMC NetWorker administrator wants to prevent tapes from staying mounted after backups complete. Which parameter must be set?
A. Idle device timeout.
B. Poll interval.
C. Unload sleep.
D. Eject time.
Answer: A
QUESTION 44
On a given EMC NetWorker host, what does the server’s file define?
A. Server(s) that can back up the host.
B. User(s) allowed to log in remotely to that host.
C. Storage node(s) to which backups are sent.
D. Server(s) that can administer the host.
Answer: A
QUESTION 45
If a Level 5 backup is performed for an EMC NetWorker client, at what level is its Client File Index backed up?
A. 5
B. Incremental
C. Full
D. 9
Answer: A
QUESTION 46
If an incremental backup is performed for an EMC NetWorker client, at which level is its Client File Index backed up?
A. 9
B. 1
C. Full
D. Incremental
Answer: A
QUESTION 47
What is a characteristic of EMC NetWorker volume cloning?
A. Only save sets beginning on the volume are cloned.
B. The cloned volume results in a complete mirror of the source volume.
C. Only save sets beginning and ending on the volume are cloned.
D. All save sets on the volume are cloned.
Answer: A
QUESTION 48
ClientA is a client in an EMC NetWorker environment. There are two EMC NetWorker servers, ServerA and ServerB. There is also one storage node, StorageNodeA. You noticed that there are no entries in the /nsr/res/servers file on ClientA. Which system(s) is(are) allowed to back up data from ClientA?
A. Any EMC NetWorker server.
B. ServerA only.
C. Any EMC NetWorker server, using StorageNodeA.
D. No systems are allowed to back up ClientA.
Answer: A
QUESTION 49
What is the EMC NetWorker nsraddadmin command used for?
A. Adding administrators to EMC NetWorker.
B. Adding new EMC NetWorker clients.
C. Allowing EMC NetWorker Servers to back up specific clients.
D. Adding new EMC NetWorker Storage Nodes.
Answer: A
QUESTION 50
What command option can be used to test connectivity and simulate the backup on an EMC NetWorker client without backing up the data?
A. save -n
B. save -p
C. save -k
D. save -i
Answer: A
Welcome to try PassLeader E20-597 VCE and PDF dumps: https://www.passleader.com/e20-597.html (290 Q&As)
Or, download more PassLeader E20-597 dumps for FREE: https://drive.google.com/open?id=1GwsHdzuE08LQdZ5G-dMAk_mWb1hpLl7d