Latest E05-001 Dumps in VCE and PDF from PassLeader: https://www.passleader.com/e05-001.html (180 Q&As), welcome to download the latest DELL&EMC E05-001 exam dumps from PassLeader.com. PassLeader.com has the most valid E05-001 exam dumps, which will help you passing E05-001 exam easily! Both E05-001 VCE and PDF dumps are available now, 100% pass ensure.
Besides, you can download the latest PassLeader E05-001 Dumps online for FREE: https://drive.google.com/open?id=1OZeIysc59GzBQYARZ84NcTdwWC03XWIi
How does an iSCSI initiator discover its targets?
A. Initiator sends a query to an iSNS server for a list of available targets.
B. Initiator receives the iSCSI names of its targets from the primary DNS server.
C. Initiator uses the data center bridging exchange protocol for the discovery.
D. Initiator sends SCSI commands and the target responds by sending its name.
What is a benefit of configuring EX_Ports on each Fibre Channel over IP (FCIP) gateway in an FCIP tunnel implementation?
A. Enables FC-FC routing through the FCIP tunnel without merging the fabrics.
B. Merges the fabrics at either end of the FCIP tunnelto create a single large fabric.
C. Transfers VSAN tagged traffic over the FCIP tunnel without FC protocol overhead.
D. Creates eight virtual FC links on the FCIP tunnel that can be paused and restarted independently.
Which lossless Ethernet functionality helps Converged Enhanced Ethernet (CEE) devices to convey and configure their features with the other CEE devices in the network?
A. Data center bridging exchange protocol
B. Enhanced transmission selection
C. Priority-based flow control
D. Congestion notification
In an FCoE environment, which functionality provides a framework for the allocation of bandwidth to different network traffic classes?
A. Enhanced transmission selection
B. Priority-based flow control
C. Congestion notification
D. Data center bridging exchange protocol
What is a component of an FCoE switch?
A. Ethernet Bridge
B. Virtual N_Port
C. Converged Network Adapter
D. FCIP Forwarder
What is a function of a Fibre Channel Forwarder in an FCoE SAN?
A. Applies zoning configurations and provides fabric services.
B. Transfers FCoE traffic over an FC SAN.
C. Encapsulates IP packets into FC frames.
D. Provides both NIC and FC HBA functionality.
What is an accurate statement about VLANs and VSANs in an FCoE environment with an existing FC SAN?
A. A dedicated VLAN must be configured for each VSAN.
B. VLANs configured for VSANs must carry regular LAN traffic.
C. Default VLAN must map to all VSANs defined in the FCoE switch.
D. A minimum of four VLANs must be created to isolate VSAN traffic.
Which action takes place during the login phase in an FCoE SAN?
A. VN_Ports obtain FC addresses.
B. Nodes locate the Fibre Channel Forwarder.
C. Initialization protocol starts transporting FC data.
D. VN_Port to N_Port pairing is established.
What is an accurate statement about a fabric-provided MAC address (FPMA) used in an FCoE SAN?
A. FCoE switches provide MAC addresses to VN_Ports during node login.
B. FC switches provide MAC addresses to VE_Ports dynamically during discovery.
C. Compute systems provide MAC addresses to the VF_Ports on FCoE switches.
D. Both VF_Ports and VE_Ports obtain MAC addresses from FC switches.
What is determined by the recovery point objective in a business continuity solution?
A. Frequency of the backup
B. Type of backup devices
C. Type of disaster recovery site
D. Distance between the primary and disaster recovery sites
A system has three components and all three components need to be operational for 24 hours; Monday through Friday. During a particular week, failure of component 3 occurred as follows:
– Tuesday = 8 AM to 1 PM
– Thursday = 5 PM to 10 PM
– Friday = 5 AM to 10 AM
What is the mean time between failures on component 3 for that week?
A. 5 hours
B. 35 hours
C. 40 hours
D. 51 hours
A system has three components and all three components need to be operational for 24 hours; Monday through Friday. During a particular week, failure of component 1 occurred as follows:
– Tuesday = 8 AM to 11 AM
– Thursday = 8 PM to 10 PM
– Friday = 5 AM to 9 AM
What is the mean time between failures on component 1 for that week?
A. 3 hours
B. 37 hours
C. 40 hours
D. 53 hours
In which stage of the business continuity planning lifecycle does an organization identify critical business processes and assign recovery priorities?
B. Establishing objectives
C. Designing and developing
What refers to an IT infrastructure’s ability to function based on business expectations during its specified time of operations?
A. Information availability
B. Disaster recovery
C. Compliance adherence
D. Business agility
What is a benefit of backing up data to a disk library?
A. Provides improved backup and recovery performance.
B. Provides built-in portability to meet offsite requirements.
C. Supports the shoe shining effect for improved backup performance.
D. Pre-configured and dedicated appliance is only used for backups.
Welcome to try PassLeader E05-001 VCE and PDF dumps: https://www.passleader.com/e05-001.html (180 Q&As)
Or, download more PassLeader E05-001 dumps for FREE: https://drive.google.com/open?id=1OZeIysc59GzBQYARZ84NcTdwWC03XWIi