This page was exported from DELL and EMC Cert Exam Dumps of VCE and PDF from PassLeader [ http://www.dell-emc-dumps.com ] Export date:Wed Oct 23 16:05:18 2019 / +0000 GMT ___________________________________________________ Title: Download PassLeader New DELL-EMC E20-375 Exam Dumps for Free in VCE and PDF (Question 141 - Question 160) --------------------------------------------------- Latest E20-375 Dumps in VCE and PDF from PassLeader: https://www.passleader.com/e20-375.html (232 Q&As), welcome to download the latest DELL&EMC E20-375 exam dumps from PassLeader.com. PassLeader.com has the most valid E20-375 exam dumps, which will help you passing E20-375 exam easily! Both E20-375 VCE and PDF dumps are available now, 100% pass ensure. Besides, you can download the latest PassLeader E20-375 Dumps online for FREE: https://drive.google.com/open?id=1aZ2kLYcJbpe1Kr5lhudnH5FI9gwgyV7S QUESTION 141Which statement is true regarding vRPAs? A.    vRPAs are deployed using the OVA template.B.    The proper license must be installed before vRPA deployment.C.    vRPAs can be connected to storage through the VNX splitter in the RecoverPoint/SE system.D.    vRPAs are installed using Unisphere for RecoverPoint. Answer: A QUESTION 142After selecting a cluster in the RPA Clusters tab, which option can display alerts that have been logged for any of the physical components of the RecoverPoint system in that cluster? A.    General Cluster InfoB.    Overall HealthC.    System EventsD.    System Notifications Answer: A QUESTION 143You are concerned about the performance of the RecoverPoint replication. Some of the Consistency Groups continue to go into High Load. Initial troubleshooting points to a data compression issue. Which command will determine if compression is set too high? A.    detect_bottlenecksB.    get_events_logC.    topD.    config_io_throttling Answer: A QUESTION 144An administrator performs a Consistency Group failover to a remote cluster. What happens to the data stored in the copy journal after the copy journal becomes the production journal? A.    It is deleted.B.    It is replicated to the journal at the production site.C.    It is replicated to the journal volume at the DR site.D.    It remains as accessible snapshots at the DR site. Answer: A QUESTION 145You are implementing a RecoverPoint/SE cluster using vRPAs. What must be configured and available on the new VNX array prior to the installation of the cluster with Deployment Manager? A.    An iSCSI interface from SPA and SPB of the VNX.B.    Zones from SPA and SPB FC ports to the ESX servers.C.    Zones from SPA and SPB FC ports to the Virtual WWNs of the vRPAs.D.    Physical connections from the ESX HBAs to the FC interfaces of SPA and SPB. Answer: A QUESTION 146When adding a new vRPA, what is the only storage authentication method that is supported? A.    CHAPB.    iSNSC.    RADIUSD.    LDAP Answer: A QUESTION 147A VPLEX write splitter can be shared with how many RecoverPoint clusters? A.    5B.    6C.    8D.    10 Answer: B QUESTION 148Which type of Consistency Group requires a primary and secondary production copy? A.    MetroPointB.    SynchronousC.    DistributedD.    Asynchronous Answer: A QUESTION 149Which FA ports must the production LUN be mapped to in order to perform write splitting using the VMAX splitter? A.    The ports zoned to both the Host and the RPAs only.B.    Every available port; the RPAs access the VMAX through the gatekeepers.C.    The ports zoned to the Production Host only.D.    The ports zoned to the RPAs only. Answer: A QUESTION 150When registering the RPA with a VNX to enable a VNX splitter for RecoverPoint, what failover mode must be set on the VNX? A.    1B.    2C.    3D.    4 Answer: D QUESTION 151A customer environment uses VMAX arrays for production storage. The customer wants to implement RecoverPoint for data protection. Having researched vRPAs, they want to use this technology as well. What should you advise them? A.    vRPAs are only supported with VNX arrays.B.    Add iSCSI interfaces to their VMAX arrays.C.    Use vRPAs with FC connections to the SAN.D.    Implement FCoE for connections from the vRPAs. Answer: A QUESTION 152What is a possible trigger to initiate RecoverPoint Snap-based Replication? A.    High Load condition detected.B.    RecoverPoint snapshot takes place.C.    INIT snapshot takes place.D.    Incoming date marked on Delta Marker stream. Answer: A QUESTION 153Which ports from a VPLEX Metro system must be zoned to the RPAs in order to install the VPLEX write splitter? A.    FE and BE ports.B.    FE ports only.C.    BE ports only.D.    FA ports. Answer: A QUESTION 154Which tool do you need in order to run the save_settings command from a Windows command prompt? A.    PLinkB.    PuTTYC.    CuteFTPD.    WinSCP Answer: A QUESTION 155You are responsible for installing a four-node RPA cluster. All RPAs are powered on. Both the FC and IP networks are connected, zoned, and routed properly. The RPAs are loaded with the latest image and IP addresses are set. However, Deployment Manager cannot discover RPAs. What is a possible cause? A.    Port 22 not open between host running Deployment Manager and RPAs.B.    Deployment Manager host and RPAs on different subnets.C.    DHCP not used to set IP addresses for RPAs.D.    RPAs not installed separately using Deployment Manager. Answer: A QUESTION 156A VMware user is currently protecting their virtual application servers with RecoverPoint. All data is stored on two VNX arrays. They will soon be adding Site Recovery Manager (SRM) to their VMware infrastructure. What will be needed to integrate RecoverPoint functionality into their SRM deployment? A.    EMC Storage Replication Adapter (SRA) for RecoverPoint only.B.    EMC Virtual Storage Integrator (VSI).C.    EMC Storage Replication Adapters (SRAs) for VNX and RecoverPoint.D.    vSphere SRM Plug-in for Unisphere for RecoverPoint. Answer: A QUESTION 157A RecoverPoint cluster contains a Consistency Group with one remote copy. Which volume can be used to verify that snapshots are being created? A.    Remote copyB.    Production copyC.    RepositoryD.    Snap copy Answer: A QUESTION 158What information is required to connect a new RecoverPoint cluster to an existing one? A.    WAN IP address and internal cluster nameB.    RPA serial IDC.    Site ID and Management IP addressD.    Internal cluster name only Answer: A QUESTION 159A conversion from RecoverPoint/SE to RecoverPoint/EX was just completed. What is the next required step? A.    Remove RecoverPoint/SE license, then add RecoverPoint/EX license.B.    Add RecoverPoint/EX license directly, because the newly added license will replace the existing one.C.    Run a health check of RecoverPoint/EX.D.    Reconfigure the Consistency Groups. Answer: A QUESTION 160Which statement is true about Logged Access mode? A.    RecoverPoint will roll back (or forward) the snapshots until the selected image is reached.B.    RecoverPoint creates a virtual disk by pulling the needed data either from the snapshots or from the storage.C.    RecoverPoint will retrieve the snapshot from the Image Access log.D.    When Logged Access is disabled, all writes made to the image will be saved to the journal. Answer: A Welcome to try PassLeader E20-375 VCE and PDF dumps: https://www.passleader.com/e20-375.html (232 Q&As) Or, download more PassLeader E20-375 dumps for FREE: https://drive.google.com/open?id=1aZ2kLYcJbpe1Kr5lhudnH5FI9gwgyV7S --------------------------------------------------- Images: --------------------------------------------------- --------------------------------------------------- Post date: 2018-02-06 09:12:50 Post date GMT: 2018-02-06 09:12:50 Post modified date: 2018-02-06 09:12:50 Post modified date GMT: 2018-02-06 09:12:50 ____________________________________________________________________________________________ Export of Post and Page as text file has been powered by [ Universal Post Manager ] plugin from www.gconverters.com